Stand Dryer – APST 2031
Aplus Stand Dryer – APST 2031 is a pet hair dryer equipped with wheels to facilitate movement. Using a 70W AC motor which can produce a quiet and strong wind volume. Very easy to use because it can be adjusted in 2 levels of wind speed and 4 levels of temperature regulation. It has a strong power of up to 2000W with 4 stages of temperature adjustment (natural wind, low temperature, medium temperature, and high temperature) that can be adjusted easily as needed. Equipped with the ease of adjusting an ergonomic height (110cm – 140cm). Can be positioned at various angles as you wish, for the vertical position it can be adjusted 180 degrees, and for the horizontal position it can rotate 360 degrees. The dryer rubber nozzle can be rotated up to 360 degrees to improve drying efficiency.
Product specifications:
– Product model number = APST-2031
– Motor = 70W AC
– Height = 110cm – 140cm
– Weight = 13.5kg (including box)
– Power consumption = 1.800W
– Temperature level = 4 levels (natural wind, low temperature, medium temperature, high temperature)
– Wind control = 2 levels (weak, strong)
– Product origin = Korea
Assembly instructions:
1. Place the wheel feet on the floor, then insert the support posts into the holes found on the wheel legs.
2. In the inverted state after inserting the posts into the holes, press the supporting posts firmly against the floor.
3. Then you will hear a “click” and make sure the pole and wheel legs have been installed perfectly and firmly.
4. Place the hair dryer head on the top of the support post.
5. Pair the two parts perfectly.
6. Turn the black knob slowly until it clicks into place.
7. Adjust the height of the hair dryer as desired.
8. Then turn the black knob until the pole stands firmly.
Instructions for cleaning or replacing a hair dryer filter:
1. Turn the black knob on the side of the hairdryer counterclockwise.
2. Once open, remove and take out the filter then wash it off using a mild detergent.
3. After washing clean, make sure the filter has been dried completely.
4. Put the filter that has dried or a new filter on the filter cover, attach and adjust the filter to the position of the bolt.
5. Turn the black knob back clockwise.
Attention:
– Do not let water get into the hair dryer.
– Do not disassemble the machine carelessly.
– It is recommended to clean or replace the filter regularly.